10-Gigabit Ethernet Dwdm Otn Pic (T320 Router) - Juniper T320 Manual

Cables and connectors
LEDs
Related
Documentation

10-Gigabit Ethernet DWDM OTN PIC (T320 Router)

Software release
Description
Copyright © 2015, Juniper Networks, Inc.
Duplex SC/PC connector (RX and TX)
Fiber-optic 10-Gigabit DWDM transceivers:
Extra-Long Wavelength Serial DWDM, LAN Rate
Optical interface specifications—see
Specifications" on page 39
Status LED, one bicolor:
Off—PIC is not enabled.
Green—PIC is operating normally.
Red—PIC has an error or failure.
Port LEDs, one pair:
Link—If green, the port is online; if there is no light, the port is down.
RX—If flashing green, the port is receiving data; if there is no light, the port might be on but is
not receiving data.
T320 PIC Description
T320 PIC Combination Limitations
T320 PICs Supported on page 3
Junos OS Release 9.4 and later (Type 3)
One 10-Gigabit Optical Transport Network (OTN) port for transport of 10-Gigabit Ethernet
(10GBASE-R) traffic
Power requirement: 0.55 A @ 48 V (26.6 W)
Supports large Ethernet frame sizes for more efficient throughput across the intra-POP network
Model number: PC-1XGE-DWDM-OTN
Chapter 7: Ethernet PIC Descriptions
"10-Gigabit Ethernet DWDM Optical Interface
111