Sonet/Sdh Oc3/Stm1 Optical Interface Specifications; Sonet/Sdh Oc3/Stm1 Specifications - Juniper T320 Manual

T320 Core Router Interface Module Reference
Related
Documentation

SONET/SDH OC3/STM1 Optical Interface Specifications

SONET/SDH OC3/STM1 Specifications

40
Table 24: 10-Gigabit Ethernet DWDM LAN Rate Optical Interface
Specifications
Parameter
Optical interface
Transceiver type
Standard
Maximum distance
Transmitter wavelength
Average launch power
Transmit extinction ratio
Average receive power
Receiver saturation
Receiver sensitivity
Supported Network Interface Standards by Transceiver for ACX, M, MX, and T Series
Routers on page 19
The SONET/SDH OC3/STM1 standards are supported on M Series routers, MX Series
routers, and T Series routers.
To determine which transceivers support each SONET/SDH OC3/STM1 standard, see
"Supported Network Interface Standards by Transceiver for ACX, M, MX, and T Series
Routers" on page 19. The "Cables and connectors" section in the description for each
MIC or PIC lists which standards and transceivers are supported for that device.
The specifications are organized by distance supported.
SONET/SDH OC3/STM1 Specifications on page 40
SONET/SDH OC3/STM1 Intermediate Reach (IR-1) Specifications on page 41
SONET/SDH OC3/STM1 Long Reach (LR-1) Specifications on page 41
SONET/SDH OC3/STM1 Long Reach (LR-2) Specifications on page 42
Table 25 on page 41 shows the multimode SONET/SDH OC3/STM1 optical interface
specifications.
Extra-Long Wavelength Serial DWDM, LAN
Rate
Single-mode
Dense wavelength division multiplexing (DWDM)
ITU-T G.694.1
9/125 SMF cable: 49.6 miles (80 km)
1528.77 through 1563.86 nm, 100-GHz ITU grid
0 through 4.0 dBm
9.0 dBm
–24.0 through –7.0 dBm
–7.0 dBm
–24.0 dBm
Copyright © 2015, Juniper Networks, Inc.