Channelized STM1 IQ PIC (T320 Router)
Software release
Description
Hardware features
Software features
Cables and connectors
Copyright © 2015, Juniper Networks, Inc.
T320 PIC/FPC Compatibility on page 10
SONET/SDH OC3/STM1 Optical Interface Specifications on page 40
Junos OS Release 6.0 and later (Type 1)
One STM1 port
Power requirement: 0.39 A @ 48 V (18.6 W)
Fine-grained queuing per logical interface
Channelization: STM1c, fractional E1, framed and unframed DS0
Packet buffering, Layer 2 parsing
Local and remote loopback testing
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
SNMP: SONET/SDH MIB, T1/E1 MIB
Dynamic, arbitrary channel configuration
Full bit error rate test (BERT) patterns at E1 and DS0 levels
Encapsulations:
High-Level Data Link Control (HDLC)
Frame Relay
Circuit cross-connect (CCC)
Translational cross-connect (TCC)
Point-to-Point Protocol (PPP)
Duplex SC/PC connector (Rx and Tx); single-mode intermediate-reach fiber
Chapter 4: Channelized IQ PIC Descriptions
71