4.20 System board
4.20 System board
Removing the System board
To remove the system board, follow the steps below and refer to Figure 4-27.
1. Disconnect the LCD cable and FL cable from the connectors CN5600 and CN5601
2. Disconnect the LED cable from the connector CN3260 on the system board (front).
3. Remove the following screws and system board.
4. Remove the audio cover.
PORTEGE R200 Maintenance Manual (960-519)
Downloaded from
www.Manualslib.com
on the system board.
•
M2×3C
manuals search engine
S-FLAT HEAD screw
4 Replacement Procedures
x2
[CONFIDENTIAL]
4-39