Toshiba PORTEGE R200 Maintenance Manual page 267

4.25 Hinge
Installing the hinge
To install the hinge, follow the steps below and refer to Figure 4-33 to 4-35.
1. Install the both sides' hinges and secure them with the following screws.
2. Pass the LCD cable through the hole and set it in place.
3. Install the palm rest and secure it with the following screws (back).
4. Install the both sides' hinge caps and secure them with the following screws (back).
PORTEGE R200 Maintenance Manual (960-519)
Downloaded from www.Manualslib.com
•
M3×3S BIND screw
•
M2×4B S-FLAT HEAD screw
•
M2.5×4B FLAT HEAD screw
•
M2×3C S-FLAT HEAD screw
manuals search engine
4 Replacement Procedures
x2
x2
x4
x2
[CONFIDENTIAL] 4-51