Toshiba PORTEGE R200 Maintenance Manual page 155

3.20 ONLY ONE TEST
Subtest 07
PORTEGE R200 Maintenance Manual (960-519)
Downloaded from www.Manualslib.com
LED
This subtest checks if each LED lights properly.
The following message appears in the display in order. Follow the instructions
in the display to execute the test.
[HDD Access LED test]
Press any key and following message appears in the display.
[Caps/Num/Overlay BT/W-LAN LED test]
(1) Press [Caps Lock ] key ! ...Caps
(2) Press [Fn + F10
(3) Press [Fn + F11
(4) Slide [BT/W-LAN switch L&R]!
Confirm corresponding LED lights properly.
Press Enter and following message appears in the display.
Check [PowerSW-LED]= Green
Check if the Power Switch LED lights in the following order.
(Green → Orange → Blue → OFF)
Press any key and following message appears in the display.
Check [DC-IN]&[Power]&[Main Battery]LED= Green/Orange
Check if the each LED lights in the same color shown in the display (Message
switches Green ↔ Orange).
Press Enter and return to the ONLY ONE TEST menu.
manuals search engine
3 Tests and Diagnostics
] key ! ...Arrow
] key ! ...Num
[CONFIDENTIAL]
(on/off)
(on/off)
(on/off)
(on/off)
3-47