2 Troubleshooting
2.14 Wireless LAN Troubleshooting
To check if the wireless LAN is good or no good, follow the troubleshooting procedures
below as instructed.
Procedure 1
Before starting the test, make sure the wireless communication switch is set in the ON
position.
Check 1
2-52
Downloaded from
www.Manualslib.com
Procedure 1: Transmitting-Receiving Check
Procedure 2: Antennas' Connection Check
Procedure 3: Replacement Check
Transmitting-Receiving Check
Execute wireless LAN test program to check the transmitting-receiving function of
wireless LAN. You will need a second computer that can communicate by wireless
LAN. Perform the test following the instructions described in Chapter 3.
If the computer passes the test, the function is correctly working. If the computer
does not pass the test, perform Procedure 2.
[CONFIDENTIAL]
manuals search engine
2.14 Wireless LAN Troubleshooting
PORTEGE R200 Maintenance Manual (960-519)