Modem Test - Toshiba PORTEGE R200 Maintenance Manual

3 Tests and Diagnostics
3.27.2
For this subtest, connect the modem PCB and RJ11 connector with a harness. Use the
dedicated "FAT-MODE inspection device (product code: QE2000P01 made by Nitto Electric
Manufacture Co.Ltd)" for the tests.
To execute Modem test, press 2 and Enter. Following message will appear.
NOTE: The menu displayed by your computer may be slightly different from the one
RJ11 Connection Check (LED) (Operator's Check LED) test will be executed, and the
following message will appear.
If the color in the LED of the connection checker is orange, press Y, otherwise, press N.
3-72
Downloaded from www.Manualslib.com

Modem test

[Modem loopback test !]
ICHx MDC Test Program with Modem Sound (Line Test)
Version X.X
* Scorpio Modem Initialize
* Digital Loopback Test
* RJ11 Connector Check (LED)
shown above.
...Press Key (Y = OK , N =NG)
[CONFIDENTIAL]
manuals search engine
3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program
:OK
:OK
:(Operator's Check!!)
PORTEGE R200 Maintenance Manual (960-519)