Keyboard - Toshiba PORTEGE R200 Maintenance Manual

4.6 Keyboard

4.6
Removing the keyboard
To remove the keyboard, follow the steps below and refer to Figure 4-8 and 4-9.
CAUTION: As the keytop may fall out, when handling the keyboard always hold it by the
1. Remove the following screw.
2. Turn over the computer and open the display.
3. Insert your nails in the slot of the right topside and left topside of the keyboard
4. Remove the following screws fixing the keyboard.
5. Lift the upper side of the keyboard and turn it face down on the palm rest.
PORTEGE R200 Maintenance Manual (960-519)
Downloaded from www.Manualslib.com

Keyboard

frame and do not touch the keytop.
•
M2×4S
holder and lift it up to remove.
• M2×2.5C S-FLAT HEAD screw
Keyboard holder
M2×2.5C S-FLAT HEAD
M2×4S BIND
Figure 4-8 Removing the keyboard holder
manuals search engine
BIND screw
M2×2.5C S-FLAT HEAD
4 Replacement Procedures
x1
x2
Keyboard
[CONFIDENTIAL] 4-17