Detaching And Refitting The Engine Pwb; Pwbs - Kyocera KM-2560 Service Manual

1-5-8

PWBs

(1) Detaching and refitting the engine PWB

Follow the procedure below to replace the engine PWB.
Procedure
1. Remove eleven screws and remove the rear
cover.
2. Remove three screws.
3. Remove the claw.
4. Remove the connector.
5. Remove the high voltage PWB.
Screws
(eleven)
Rear cover
Connector
High voltage
PWB
Screw
Figure 1-5-100
Screw
Screw
Claw
Figure 1-5-101
2H0/2HZ-1
1-5-55