Kyocera KM-2560 Service Manual page 201

9. Remove the claw and remove the left upper
cover.
10. Remove the scanner left cover.
11. Remove YC24, YC17 and YC31 connectors
of the engine PWB.
12. Remove FFC from YC16 connector of the
engine PWB.
13. Remove the relay connector.
14. Release the clamp and remove the wire.
15. Remove FFC from YC18 connector of the
main PWB.
Left upper cover
Claw
Clamp
Relay
connector
Main PWB
Connector (YC18)
FFC
Scanner left cover
Figure 1-5-39
Connector
Connector
(YC24)
(YC17)
FFC
Connector
(YC31)
Engine PWB
Figure 1-5-40
2H0/2HZ
Connector
(YC16)
1-5-21