Detaching And Refitting The Fuser Thermistor 2 - Kyocera KM-2560 Service Manual

Hide thumbs Also See for KM-2560:

Table of Contents

(7) Detaching and refitting the fuser thermistor 2

Follow the procedure below to replace the fuser thermistor 2.

1. Remove the fuser unit (see page 1-5-41).

2. Remove four claws and remove the fuser

3. Remove the connector.

4. Remove the band.

5. Remove the screw and remove the fuser

thermistor 2.

6. Replace the fuser thermistor 2 and install

the thermistor.

7. Refit all the removed parts.

Fuser thermistor 2

Fuser unit cover

Figure 1-5-92

Figure 1-5-93