Kyocera KM-2560 Service Manual page 223

8. Remove three connectors.
9. Remove the screw and remove the fuser
unit.
10. Check or replace the fuser unit and install
the unit.
11. Refit all the removed parts.
When the fuser unit is replaced, perform
maintenance mode U167 to clear the
counter value (see page 1-3-48).
Fuser unit
Figure 1-5-79
Fuser unit
Screw
Figure 1-5-80
2H0/2HZ-1
Connector
Connector
Connector
1-5-43