Cisco catalyst 3750 Command Reference Manual page 565

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
SuppTimeout = 30
ReAuthPeriod = 3600 (Locally configured)
ReAuthMax = 2
MaxReq = 2
TxPeriod = 1
RateLimitPeriod = 0
Mac-Auth-Bypass = Enabled
Critical-Auth = Enabled
Critical Recovery Action = Reinitialize
Critical-Auth VLAN = 10
Guest-Vlan = 15
Dot1x Authenticator Client List
-------------------------------
Domain = DATA
Supplicant = 0000.aaaa.bbbb
Auth SM State = AUTHENTICATED
Auth BEND SM Stat = IDLE
Port Status = AUTHORIZED
Authentication Method = MAB
Vlan Policy = 20
This is an example of output from the show dot1x interface interface-id statistics command.
describes the fields in the display.
Switch> show dot1x interface gigabitethernet1/0/2 statistics
Dot1x Authenticator Port Statistics for GigabitEthernet1/0/2
--------------------------------------------
RxStart = 0
RxInvalid = 0
TxReq = 2
RxVersion = 2
Table 2-26
Field
RxStart
RxLogoff
RxResp
RxRespID
RxInvalid
RxLenError
RxTotal
TxReq
TxReqId
OL-8552-07
RxLogoff = 0 RxResp = 1
RxLenErr = 0 RxTotal = 2
TxReqID = 132 TxTotal = 134
LastRxSrcMAC = 00a0.c9b8.0072
show dot1x statistics Field Descriptions
Description
Number of valid EAPOL-start frames that have been received.
Number of EAPOL-logoff frames that have been received.
Number of valid EAP-response frames (other than response/identity frames) that
have been received.
Number of EAP-response/identity frames that have been received.
Number of EAPOL frames that have been received and have an unrecognized
frame type.
Number of EAPOL frames that have been received in which the packet body
length field is invalid.
Number of valid EAPOL frames of any type that have been received.
Number of EAP-request frames (other than request/identity frames) that have
been sent.
Number of Extensible Authentication Protocol (EAP)-request/identity frames
that have been sent.
RxRespID = 1
Catalyst 3750 Switch Command Reference
show dot1x
Table 2-26
2-535