Cisco catalyst 3750 Command Reference Manual page 508

set
To return to policy-map configuration mode, use the exit command. To return to privileged EXEC mode,
use the end command.
Examples
This example shows how to assign DSCP 10 to all FTP traffic without any policers:
Switch(config)# policy-map policy_ftp
Switch(config-pmap)# class ftp_class
Switch(config-pmap-c)# set dscp 10
Switch(config-pmap)# exit
You can verify your settings by entering the show policy-map privileged EXEC command.
Related Commands Command
class
police
policy-map
show policy-map
trust
Catalyst 3750 Switch Command Reference
2-478
Description
Defines a traffic classification match criteria (through the police, set, and trust
policy-map class configuration commands) for the specified class-map name.
Defines a policer for classified traffic.
Creates or modifies a policy map that can be attached to multiple ports to
specify a service policy.
Displays QoS policy maps.
Defines a trust state for traffic classified through the class policy-map
configuration command or the class-map global configuration command.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
OL-8552-07