Switch Priority - Cisco catalyst 3750 Command Reference Manual

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

switch priority

Use the switch priority global configuration command on the stack master to change the stack member
priority value.
Syntax Description stack-member-number
priority new-priority-value
Defaults The default priority value is 1.
Command Modes Global configuration
Command History Release
12.1(11)AX
Usage Guidelines The new priority value is a factor during a stack-master re-election. Therefore, changing the priority
value does not change the stack master immediately.
Examples This example shows how to change the priority value of stack member 6 to 9:
Switch(config)# switch 6 priority 9
Changing the Switch Priority of Switch Number 6 to 9
Do you want to continue?[confirm]
Related Commands Command
reload
session
switch renumber
show switch
OL-8552-07
switch stack-member-number priority new-priority-value
Modification
This command was introduced.
Description
Reloads the stack member and puts a configuration change into effect.
Accesses a specific stack member.
Changes the stack member number.
Displays information about the switch stack and its stack members.
Specify the current stack member number. The range is 1 to 9.
Specify the new stack member priority value. The range is 1 to 15.
Catalyst 3750 Switch Command Reference
switch priority
2-821