Refitting The Driving Pulley - PIAGGIO X8 125 Workshop Manual

X8 125-200
Diameter 20.5 - 20.7 mm
roller (125): Standard Diameter
Ø 18.9 ÷ 19.1 mm
Sliding bushing: Standard Diameter
Ø 25.959 ÷ 25.98 mm
movable driving half-pulley bushing: Standard
Diameter
26.000 - 26.021 mm

Refitting the driving pulley

- Preassemble the movable half-pulley with the
roller contrast plate by putting the rollers in their
housings with the larger support surface touching
the pulley according to the direction of rotation.
- Check that the roller contact plate does not have
flaws and is not damaged on the grooved edge.
- Mount the complete bushing unit on the driving
shaft.
- Fit the driven pulley/Clutch/belt unit on the en-
gine.
Engine
ENG - 109