Helmet Bay - PIAGGIO X8 125 Workshop Manual

Chassis
•
Undo the clamping screws «A» (two of
which are on the knob-type head) and
remove the air-box cover.
See also
Side fairings

Helmet bay

•
- Remove the central cover of the
frame.
•
Remove the three clamping screws of
the rear handlebar cover and remove
it.
- Open the glove box flap;
- Undo the 2 screws two on the bottom of the hel-
met compartment.
CHAS - 232
X8 125-200