Maintenance
Undo the 3 fixing screws "A", remove the secon-
dary air filter cover and then take out the filtering
element "B".
- Wash with water and neutral soap.
-Dry with a clean cloth and short blasts of com-
pressed air.
Remove the flywheel cover by operating on its
clamps and remove the primary filtering element.
- Wash with water and neutral soap.
-Dry with a clean cloth and short blasts of com-
pressed air.
Check that the filter casing is clean paying special
attention to "A" and "B" passages
CAUTION
NEVER RUN THE ENGINE WITHOUT THE SECONDARY
AIR FILTER
CAUTION
WHEN TRAVELLING ON DUSTY ROADS, THE AIR FILTER
MUST BE CLEANED MORE OFTEN THAN SHOWN IN THE
SCHEDULED MAINTENANCE CHART.
MAIN - 54
X8 125-200