Checks And Inspections; Immobiliser - PIAGGIO X8 125 Workshop Manual

Electrical system
11
12
13
14
15
16
17
18
19
20
21
22
23 Output for immobilizer diagnostic instrument
24
25
26
27 Helmet compartment lamp bulb
28
29
30
31
32
33
34 Actuators control device prewiring

Checks and inspections

This section is devoted to the checks on the electrical system components.

Immobiliser

The electric ignition system is fed with direct cur-
rent and is protected by an antitheft immobilizer
integrated to the control unit.
The ignition system consists of:
- electronic control unit
- immobilizer aerial
- master and service keys with built-in transponder
- HV coil
- diagnosis LED
-The diagnostic LED also works as a deterring
blinker. This function is activated every time the
key switch is turned to "OFF" and it remains active
48 hours so as not to damage the battery charging
process.
When the key switch is turned to "ON", this blinking
function is deactivated. A flash then confirms the
system has switched to "ON".
ELE SYS - 70
Specification
Fuse
PICS prewiring
Boot opening button
Key switch contacts
Key switch contacts
Anti-theft alarm fitting
Fuses
Clock reset push button
Immobilizer LED
Analogue clock
Antenna
Fuse
Boot button
Seat button
Socket for users
Open boot warning light
Battery
Fuse
Immobilizer aerial
Electronic ignition
Fuse
X8 125-200
Desc./Quantity
10 A
10A
5A
12V - 180W max
12V-5W
12V - 2W
12V - 12Ah
15A
15A