Flywheel Cover; Removing The Stator - PIAGGIO X8 125 Workshop Manual

Engine

Flywheel cover

Removing the hub cover
- Remove the two clamps, the two couplings and
empty the cooling system.
- Remove the 4 retainers and the flywheel cover

Removing the stator

- Remove the electric terminal of the minimum oil
pressure switch.
- Remove the two Pick-Up screws and the one for
the wiring harness bracket as well as the two stator
fixing screws shown in the figure.
- Remove the stator and its wiring.
ENG - 118
X8 125-200