X8 125-200
Flywheel nut
54 ÷ 60
Refitting the starter motor
- Fit a new O-ring on the starter motor and lubricate
it.
- Fit the starter on the crankcase and lock the 2
screws to the prescribed torque.
Locking torques (N*m)
Starter motor screws
Cylinder assy. and timing system
Removing the intake manifold
- Remove the flywheel cover completely as de-
scribed in the flywheel cover section.
- Loosen the 3 crews and remove the intake mani-
fold.
N.B.
TAMPERPROOF SCREWS ARE SUPPLIED WITH 125 CC
MODELS.
11 ÷ 13
Engine
ENG - 121