Table of Contents
Advertisement
Remove the drive backplane.
9.
To replace the component, reverse the removal procedure.
4-bay LFF hot-plug drive backplane
WARNING:
internal system components to cool before touching them.
CAUTION:
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
If installed, remove the security bezel
3.
Remove all drives
4.
Do one of the following:
5.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 29).
o
Remove the access panel
6.
Remove the air baffle
7.
Disconnect all cables connected to the drive cage backplane.
8.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, take the appropriate anti-static
("Remove the security bezel
("Hot-plug
drive" on page 34).
("Access
panel" on page 34).
("Air
baffle" on page 35).
(optional)" on page 26).
Removal and replacement procedures 37
Advertisement
Table of Contents
