Air Baffle; Four-Bay Lff Hot-Plug Rear Drive Backplane - HP Apollo 4200 Gen9 Maintenance And Service Manual

Air baffle

To remove the component:
Power down the server (on page 17).
1.
Remove the server from the rack (on page 27).
2.
Remove the access panel
3.
If an HP Smart Storage Battery is installed on the air baffle, disconnect the battery cable.
4.
Remove the air baffle.
5.
To replace the component, reverse the removal procedure.

Four-bay LFF hot-plug rear drive backplane

("Access panel" on page 36).
DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 37