If necessary for easier access to the cache module connector and/or removal of an air scoop, remove
6.
the storage controller from the PCI riser cage or from the system board
54).
If the cache module is covered by an air scoop, remove the air scoop.
7.
CAUTION:
cache module and cable are susceptible to damage. Avoid excessive force and use caution to
avoid damage to these connectors.
Disconnect the cache module backup power cable from the cache module.
8.
Remove the cache module.
9.
To replace the component, reverse the removal procedure.
M.2 SSD enablement kit
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
When connecting or disconnecting the cache module cable, the connectors on the
("Expansion
board" on page
Removal and replacement procedures 41