Table of Contents
Advertisement
Remove all DIMMs ("DIMM" on page 46).
9.
Remove the heatsink:
10.
Loosen one pair of diagonally opposite screws halfway, and then loosen the other pair of screws.
a.
Completely loosen all screws in the same sequence.
b.
Remove the heatsink from the processor backplate.
c.
Open each of the processor locking levers in the order indicated, and then open the processor retaining
11.
bracket.
CAUTION:
THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To
avoid damage to the system board, do not touch the processor or the processor socket contacts.
Removal and replacement procedures 70
Advertisement
Table of Contents
