Heatsink - HP ProLiant DL80 Gen9 Maintenance And Service Manual

Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 29).
o
Remove the access panel
4.
Remove the air baffle
5.
Remove the processor blank.
6.
To replace the component, reverse the removal procedure.

Heatsink

WARNING:
internal system components to cool before touching them.
CAUTION:
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 29).
o
Remove the access panel
4.
Remove the air baffle
5.
("Access panel" on page 34).
("Air baffle" on page 35).
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, take the appropriate anti-static
("Access panel" on page 34).
("Air baffle" on page 35).
Removal and replacement procedures 48