Table of Contents
Advertisement
CAUTION:
Close and hold down the processor cover socket while closing the processor locking
levers. The levers should close without resistance. Forcing the levers closed can damage the
processor and socket, requiring system board replacement.
Close the processor retaining bracket. When the processor is installed properly inside the processor
5.
retaining bracket, the processor retaining bracket clears the flange on the front of the socket.
Press and hold the processor retaining bracket in place, and then close each processor locking lever.
6.
Press only in the area indicated on the processor retaining bracket.
Install the processor socket cover on the failed system board.
7.
Clean the old thermal grease from the heatsink and the top of the processor with the alcohol swab.
8.
Allow the alcohol to evaporate before continuing.
Apply all the grease to the top of the processor in the following pattern to ensure even distribution.
9.
Install the heatsink:
10.
Removal and replacement procedures 74
Advertisement
Table of Contents
