Ricoh Aficio MP C6503SP User Manual page 215

Message
"Parallel I/F board has a
problem."
"Printer font error."
"Cannot print because both
the main and designation
(chapter) sheets are set to
the same paper tray. Press
[Job Reset] to cancel the
job. To print the job again
specify different trays."
When using direct print from a memory storage device
Message
"Exceeded the limit value for
total data size of the
selected files. Cannot select
more files."
Cause
An error has occurred in the
IEEE 1284 interface board.
An error has occurred in the
font settings.
The tray selected for other
pages is the same as the one
for slip sheets.
Cause
• The size of the selected
file exceeds 1 GB.
• The total size of the
selected files exceeds 1
GB.
Messages Displayed When You Use the Printer Function
Solution
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
Contact your service representative.
Reset the job. Be sure the tray you
select for slip sheets is not providing
paper for other pages.
Solution
Files or groups of files larger than 1 GB
cannot be printed.
• When the total size of the multiple
files that are selected exceeds 1
GB, select files separately.
• When the size of the selected file
exceeds 1 GB, print from a
memory storage device using a
function other than the Direct
printing function.
You cannot select files of different
formats at the same time.
213