When Using The Connect Copy Function - Ricoh Aficio MP C6503SP User Manual

Message
"Stapling capacity
exceeded."
"The selected folder is
locked. Please contact the
file administrator."
• If you set [Memory Full Auto Scan Restart] in [Input / Output] of User Tools to [On], even if the
memory becomes full, the memory overflow message will not be displayed. The machine will make
copies of the scanned originals first, and then automatically proceed to scan and to copy the
remaining originals. In this case, the resulting sorted pages will not be sequential. For details about
Memory Full Auto Scan Restart, see "Input / Output", Copy/ Document Server.

When Using the Connect Copy Function

Message
"Cannot connect to the sub-
machine. Check the status of
the sub-machine."
"Cannot print from the sub-
machine. Check the status of
the sub-machine."
Messages Displayed When You Use the Copy/Document Server Function
Cause
The number of sheets per set
is over the staple capacity.
An attempt was made to edit
or use a locked folder.
Causes
The icon is lit.
The hard disk of the sub-
machine is malfunctioning.
A paper or staple jam has
occurred on the sub-
machine, or toner or other
supplies need to be
replaced.
Solution
Check the stapler capacity. For details
about the stapler capacity, see
"Specifications for Finisher SR4110",
"Specifications for Finisher SR4120",
or "Specifications for Booklet Finisher
SR4130", Maintenance and
Specifications.
For details about locked folders, see
"Managing Folders", Security Guide.
Solutions
Press [Exit] on the main machine and
follow the instructions on the display.
Follow the instructions displayed. For
details about adding toner, see
"Adding Toner", Maintenance and
Specifications.
For details about jammed paper or
jammed staples, see "Removing
Jammed Paper", or "Removing
Jammed Staples", Troubleshooting.
If the sub-machine's display indicates
that a cover is open, follow the
instructions displayed.
199