Ricoh Aficio MP C6503SP User Manual page 148

9. Adding Paper and Toner
1. Open the bypass tray.
2. Insert the paper print side up as far as it will go into the machine.
3. Align the paper guides to the paper size.
If the guides are not flush against the paper, images might be skewed or paper misfeeds might
occur.
• When you use the bypass tray, it is recommended to load the paper in
• Certain types of paper might not be detected properly when placed on the bypass tray. If this
happens, remove the paper and place it on the bypass tray again.
• Pull the extender out when loading A4 , 8
• When loading thick paper, thin paper, or translucent paper, specify the paper size and the paper
type.
• Letterhead paper must be loaded in a specific orientation. For details, see page 161 "Loading
Orientation-fixed Paper or Two-sided Paper".
• You can load envelopes into the bypass tray. Envelopes must be loaded in a specific orientation.
For details, see page 177 "Envelopes".
• Specify the sizes of paper that are not automatically detected. For details about the sizes that can
be detected automatically, see page 164 "Recommended Paper Sizes and Types". For details
146
DRC164
DRC165
1
/ × 11 or larger sheets in the bypass tray.
2
orientation.