Ricoh Aficio MP C6503SP User Manual page 179

• When printing on thick smooth paper, be sure to fan the paper thoroughly before loading it. Even if
you fan the paper, it may start to stick together again gradually, and paper jams and misfeeds may
result. If paper continues to become jammed or feed in together even after they are fanned, load
them one by one from the bypass tray.
• When loading thick paper, set the paper direction according to its grain, as shown in the following
diagram:
Direction of paper
grain
• Select [Thick Paper 1], [Thick Paper 2], [Thick Paper 3], or [Thick Paper 4] as the paper thickness in
[Tray Paper Settings].
• Even if thick paper is loaded as described above, normal operations and print quality might still not
be possible, depending on the paper type.
• Prints might have prominent vertical creases.
• Prints might be noticeably curled. Flatten out prints if they are creased or curled.
Envelopes
This section gives you various details about and recommendations concerning envelopes.
• Do not use window envelopes.
• Fan the envelopes before loading them. Otherwise, the envelopes may stick together because of
the glue on them. If fanning does not prevent them sticking together, load them one by one. Note
that some types of envelopes cannot be used with this machine.
• Misfeeds might occur depending on the length and shape of the flaps.
• When loading envelopes in the
might not feed into the machine.
Tray 1 or LCT
Not recommended
orientation, load them with flaps fully open. Otherwise, they
Bypass tray or
Trays 2–3
wide LCT
Recommended Paper
177