Batch Firmware Upgrade Deployment - TRENDnet TEW-WLC100 User Manual

TRENDnet User's Guide

Batch Firmware Upgrade Deployment

Basic > AP Management > Device List
The controller allows you to upgrade firmware on multiple access points. Firmware
upgrades for the access points can be downloaded from the TRENDnet support site
http://www.trendnet.com/support and selecting the access point model under Product
Downloads. Batch firmware upgrade can only be applied to the same model TRENDnet
access point. (ex. If upgrading firmware for the TRENDnet TEW-821DAP, the firmware
upgrade can only be deployed to multiple TEW-821DAP access points only.)
1. Log into your controller management page (see
management page" on page 8).
2. Click on Basic, click on AP Management, and then click on Device List.
3. In the device list under the Select column, check the access points you would like to
deploy configuration. You can also check the box at the top of the Select column to
select all access points in the list.
4. At the top, click on FW Upgrade.
© Copyright 2016 TRENDnet. All Rights Reserved.
"Access you wireless controller
5. The list will display all of the access points you have selected and the configuration
upload status of each access point.
6. Next to Firmware Path, click on Browse or Choose File, and navigate to the unzipped
firmware file to upload and select it.
Note: Please make sure to unzip or extract the downloaded firmware file. The firmware
file should have a .bin extension.
7. After selecting the firmware file to deploy, enter the administrative management
password for the access points, (default TRENDnet access point password: admin) in the
Password field.
8. Click Upgrade to start the firmware upgrade deployment. Please wait for the
firmware upgrade deployment process to complete.
TEW-WLC100
23