Clients List; Client Traffic Statistics - TRENDnet TEW-WLC100 User Manual

TRENDnet User's Guide

Clients List

Basic > AP Management > Clients
The controller displays a list of a currently connected wireless client devices to all access
points.
1. Log into your controller management page (see
management page" on page 8).
2. Click on Basic, click on AP Management, and then click on Clients.
 MAC – Displays the client device MAC address.
 BSSID – Displays the SSID/wireless network the client device is currently
connected.
 Signal Strength – Displays the signal strength reception (dBm) or RSSI of the
client device to the connected access point and 802.11 capability of the client
device. (ex. A signal strength reception of -41dBm is better than -48dBm)
 Uptime – Displays the total amount of time the client device has been connected.
If a client device disconnects and reconnects from the wireless network, the
uptime will reset to zero.
© Copyright 2016 TRENDnet. All Rights Reserved.
"Access you wireless controller

Client Traffic Statistics

Basic > AP Management > Statistics
The controller displays more detailed information about wireless client devices traffic
utilization on all access points.
1. Log into your controller management page (see
management page" on page 8).
2. Click on Basic, click on AP Management, and then click on Statistics.
TEW-WLC100
"Access you wireless controller
26