TRENDnet TEW-WLC100 User Manual page 19

TRENDnet User's Guide
Basic Settings
o
IP Mode – Change the IPv4 address assignment type of the access
point(s).

DHCP – Sets the access point(s) to obtain the IP address
settings automatically from a DHCP server on your network.
This is the default and recommended setting.

Static – Allows you to set the access point(s) IP address
settings manually to specific parameters: IP Address, Subnet
Mask, and Gateway.
o
Primary DNS – Sets the access point(s) primary DNS server IPv4
address for name resolution.
o
Secondary DNS – Sets the access point(s) secondary DNS server IPv4
address for name resolution.
o
System Name – Sets the access point(s) device or network name.
© Copyright 2016 TRENDnet. All Rights Reserved.
Wi-Fi Settings
o
Band Steering – Check to enable or uncheck to disable band steering
functionality on the access point(s). When enabled, Band steering
automatically detects if wireless clients have dual band capability and
will automatically push wireless clients to the less congested 5GHz
wireless network.
TEW-WLC100
17