Backup And Restore Your Controller Configuration Settings; Reboot Your Controller - TRENDnet TEW-WLC100 User Manual

TRENDnet User's Guide

Backup and restore your controller configuration settings

Advanced > Administrator > Settings Management
You may have added many customized settings to your controller and in the case that
you need to reset your controller to default, all your customized settings would be lost
and would require you to manually reconfigure all of your controller settings instead of
simply restoring from a backed up controller configuration file.
To backup your controller configuration:
1. Log into your controller management page (see
management page" on page 8).
2. Click on Advanced and click on Administrator, then click on Settings Management.
3. Next to Export Settings section and Export, click Export.
4. Depending on your web browser settings, you may be prompted to save a file (specify
the location) or the file may be downloaded automatically to the web browser
settings default download folder. (Default Filename: backup-TEW-WLC100-YYYY-MM-
DD.tar.gz)
To restore your controller configuration:
1. Log into your controller management page (see
management page" on page 8).
2. Click on Advanced and click on Administrator, then click on Settings Management.
3. Next to Import Settings section and Settings File Location, click Browse.
4. A separate file navigation window should open.
5. Select the controller configuration file to restore and click Import. (Default Filename:
backup-TEW-WLC100-YYYY-MM-DD.tar.gz). If prompted, click Yes or OK.
6. Wait for the controller to restore settings.
© Copyright 2016 TRENDnet. All Rights Reserved.
"Access you wireless controller
"Access you wireless controller

Reboot your controller

Advanced > Administrator > Settings Management
You may want to restart your controller if you are encountering difficulties with your
controller and have attempted all other troubleshooting.
There are two methods that can be used to restart your controller.
 Turn the controller off for 10 seconds using the controller On/Off switch located
on the rear panel of your controller or disconnecting the power port, see
"Product Hardware Features" on page 2.
Use this method if you are encountering difficulties with accessing your controller
management page. This is also known as a hard reboot or power cycle.
OR
 Controller Management Page – This is also known as a soft reboot or restart.
1. Log into your controller management page (see
management page" on page 8).
2. Click on Advanced and click on Administrator, then click on Settings Management.
3. Next to System Reboot, click Reboot.
4. Wait for the device to reboot.
TEW-WLC100
"Access you wireless controller
12