TRENDnet TEW-WLC100 User Manual page 9

TRENDnet User's Guide
4. To configure access point settings, under the Select column, check one or multiple
access points you would like to configure and click on Device Settings to configure the
access points.
© Copyright 2016 TRENDnet. All Rights Reserved.
5. You can modify the access point basic settings such as SSID and encryption key on
each band.
Note: If you are using a combination of single band (2.4G) and dual band access points
(2.4G & 5G), the 5G settings will only be applied to dual band access points.
6. After modifying the settings, scroll down to the Password field, enter the access
point(s) management password (default access point password: admin) and click OK to
apply the settings to the access points.
TEW-WLC100
7