Troubleshooting; Problems With The S140 - Fujitsu S140 User Manual

8 Troubleshooting

This chapter describes what to do out in case of malfunction.

Problems with the S140

Displays if there is a hardware error
Carrying out a system dump
Measures to take if there is an I/O channel or an I/O processor failure
Measures to take if there is a processing computer failure
Measures to take if there is a system components failure
Problems with the service/console processor (SKP)
8.1 Problems with the S140
In the case of a problem with the S140, contact the service department and discuss the
steps to be taken. Depending on the outcome of this discussion, you may be required to
carry out the following tasks:
Take a system dump in the case of an inexplicable system failure.


Disable defective I/O processor if several I/O processors are used.


You can continue processing with the rest of the system.
If one of the IOP, MCU, SVP, SCI, SPC, or PCI system components is defective, the


service department must carry out the necessary corrective measures.
Wie Sie der Business Server S140 über Hardware-Fehler informiert, erfahren Sie im
folgenden Abschnitt.
U41161-J-Z126-1-76
page 97
page 98
page 99
page 99
page 100
page 100
page 101
97