User Frames And Subframes; Ml) Mode Selection Frame - Fujitsu S140 User Manual

Standard processing in SVP mode

6.4 User frames and subframes

The user frames are used by the operator for sending jobs to the SVP and for receiving
replies from the SVP.
Some frames have up to six subframes. The subframes contain other, more detailed
functions and information which does not fit in the main frame.
i

6.4.1 (ML) MODE SELECTION FRAME

FUNCTION=>
- EXECUTION -
*1 CPU STOP
*2 INTERRUPT
*3 TOD ENABLE
*4 SYSTEM RESET
*5 SYSTEM RESET CLEAR
*6 STORE STATUS
*7 RESTART
RA
Figure 23: MODE SELECTION FRAME screen
By making entries in this frame and pressing
execute various basic functions.
FUNCTION =>
U41161-J-Z126-1-76
This manual only describes the user frames required by the operator.
----- MODE SELECTION FRAME -----
CL-0
The desired function can be selected by entry of a number listed in the
EXECUTION column or a letter combination listed in the SELECTION
column.
- SELECTION -
*LD PROGRAM LOAD
*ST STATUS DISPLAY
*MA MANUAL OPERATION
*AD ALTER/DISPLAY
*ME MESSAGE
*CH CH/SUBCH STATUS
*AU AUXILIARY
*MF MSF
*PA PERFORMANCE ANALYZER
CPU-0 CHP-0 RUN
M
ENTER
User frames and subframes
E40L01G
CPU SELECT=>
- 0 -
STOP/START MODE=>
*1 ALL CPU
>2 TARGET CPU
M
FLAG CODE = D90557 W 00000V00
[]-[]00
, you can switch to other frames or
51