Fujitsu S140 User Manual page 30

Automatic switching on/off of the S140 via the SKP
The "Switching on / off the host" form is displayed:
By using the
you can specify
–
–
Ê
However, it is only switched off automatically if the SINIX system is shut down using
shutdown. If it is shut down and restarted using shutdown -i6, no switching action is
carried out.
!
30
(
CHOICES
P2
whether the S140 should be switched on automatically if the 3970-SKP is switched
on or SINIX is started on the 3970-SKP, and
whether the S140 should be automatically switched off if the SINIX system is shut
down or the 3970-SKP is switched off.
Press the ( ) key after filling out the form.
SAVE
P3
Configuring the automatic deactivation may have unforeseen consequences, since
switching off the 3970-SKP without thinking about it properly (e.g. for maintenance
work) also causes the S140 to be switched off.
We recommend shutting down the system manually at the required times, switching
off the S140 via the AU4 frame (see page 74) or using the sysadm form described
above (bottom query), and then switching off the 3970-SKP.
If an ATOP is connected (see page 32), the sequence of actions for switching off
must be programmed accordingly.
) to enter YES for the two questions at the top of the window,
Switching on and off
U41161-J-Z126-1-76