Fujitsu S140 User Manual page 57

Standard processing in SVP mode
2
3
PARMS =>
Position 1
Position 2 - 5 mn If an IPL is carried out from a CPU > 1 (from CPU 2 to 3), c2c3 (or
Position 6 - 8
MT CONTROL ==> IPL from tape:
1
2
3
4
U41161-J-Z126-1-76
CURRENT GROUP
UNIT ADDRESS
A maximum of 8 characters can be entered in this field. Their position
and meaning are listed below:
Ë load BS2000
1 load VM2000
C2C3) must be entered as the mnemonic name for a console
write/read, unless C2C3 is generated by default.
If the BS2000 "automatic restart" function is used, c2c3 should
always be entered in the
not used
NL
SL
NL-REWIND
SL-REWIND
If the IPL is unsuccessful, the next device address
from the PRESET GROUP is reloaded. If this
loading is terminated normally, this device address
heads the CURRENT GROUP.
The first device address in this column is the device
from which the last IPL was executed.
If the loading from this device is unsuccessful, the
IPL is repeated with the next device address. If it is
terminated normally, this address then heads the
CURRENT GROUP.
A new device address from which the operating
system is to be loaded can be entered here. If the
IPL is terminated normally, this device address is
put in first position of the CURRENT GROUP.
If the IPL is unsuccessful, the loading is not
repeated.
PARMS =>
from current tape position
skip label then load
rewind then load
rewind, skip label then load
User frames and subframes
field.
57