Inspect The Painted Surfaces - Genie Super-Straddle Service Manual

September 2016
C-5 Inspec t the Pai nted Surfac es
C-5

Inspect the Painted Surfaces

Genie specifications require that this procedure be
performed every 1000 hours or annually,
whichever comes first.
Inspecting the painted surfaces of your machine is
essential to safe operation and long machine
life. An unsafe working condition exists if there is
damage to painted surfaces that is not corrected.
1 Visually inspect all painted surfaces for
the following conditions:
• Blistering
• Rust
• Peeling
• Fading
• Corrosion
Note: Replace any component that is damaged.
Part No. 115429
Checklist C Procedures
Super Straddle
Service Manual
17