Device Information - ZyXEL Communications wap3205 V3 User Manual

The following table describes the labels in this screen.
Table 4 Connection Wizard - Access Point Mode> WLAN Setup
LABEL
WLAN Setup
802.11 Mode
Name (SSID)
Security
Security Mode
Pre-Shared Key
Apply
Reset

3.4.2 Device Information

After configuring the general settings for your WAP3205 v3's wireless network. The following screen
displays, showing all the details about your device.
Figure 10 Connection Wizard - Access Point Mode> Device Information
The following table describes the labels in this screen.
Table 5 Connection Wizard - Access Point Mode> Device Information
LABEL
System Name
Firmware Version
LAN Information
- MAC Address
Chapter 3 Connection Wizard
DESCRIPTION
Select the wireless standard the WAP3205 v3 uses.
Type the descriptive name used to identify the WAP3205 v3 in the wireless LAN.
Select the data encryption method the WAP3205 v3 uses for wireless connection.
When you select to use a security, the Pre-Shared Key field appears in this screen.
You can also select None to allow any client to associate this network without any
data encryption or authentication.
Enter the password that lets you connect to the WAP3205 v3. Your password
should be in a string of ASCII characters between 8 and 63 or hexadecimal
characters between 8 and 64.
Click Apply to save the changes to your WAP3205 v3.
Click Reset to reload the previous configuration of this screen.
DESCRIPTION
This is the WAP3205 v3's model name.
This is the current firmware version of the WAP3205 v3.
This shows the LAN Ethernet MAC Address of your device.
WAP3205 v3 User's Guide
23