ZyXEL Communications wap3205 V3 User Manual page 38

The following table describes the labels shown in the Status screen.
Table 14 Status Screen (Universal Repeater Mode)
LABEL
Device Information
System Name
Firmware Version
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- DHCP Server
WLAN AP Information
- MAC Address
- Status
- Name (SSID)
- Channel
- Operating Channel
- Security Mode
- 802.11 Mode
- WPS
WLAN STA Information
- SSID
- Security Mode
- Connection Status
System Status
Operation Mode
System Up Time
Current Date/Time
Interface Status
Interface
Status
Chapter 4 Modes
DESCRIPTION
This is the System Name you enter in the Maintenance > System > General screen.
It is for identification purposes.
This is the current firmware version of the WAP3205 v3.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP server.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN - Enabled or Disabled.
This shows a descriptive SSID name used to identify the WAP3205 v3 in the wireless
LAN.
This shows the channel number which you select manually or Auto when the
WAP3205 v3 automatically scans and selects the Wireless LAN's channel.
This shows the current channel number the WAP3205 v3 uses over the Wireless LAN.
This shows the data encryption method the WAP3205 v3 uses for the wireless
connection.
This shows the IEEE 802.11 standard that the WAP3205 v3 supports. Wireless clients
must support the same standard in order to be able to connect to the WAP3205
v3.
This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
This is the name of the selected AP that the WAP3205 v3 is associating with.
This shows the wireless security the WAP3205 v3 is using to connect to the wireless
device.
This shows whether the WAP3205 v3 is currently associated with the selected AP.
This field shows the device operating mode: Access Point, Universal Repeater or
Client Bridge.
This is the total time the WAP3205 v3 has been on.
This field displays your WAP3205 v3's present date and time.
This displays the WAP3205 v3 port types.
For the LAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
WAP3205 v3 User's Guide
38