Wlan Information Screen - ZyXEL Communications wap3205 V3 User Manual

Table 28 Network > Wireless LAN > AP Select (continued)
LABEL
Select
SSID
MAC
Channel
Mode
Security Mode
Strength
Refresh
Connect

6.11 WLAN Information Screen

Use this screen to view the SSID and security of the selected AP wireless network when the WAP3205 v3 is
in client bridge mode. To open this screen, click Network > AP Select > WLAN Info tab.
Figure 47 Network > AP Select > WLAN Information
The following table describes the labels in this screen.
Table 29 Network > AP Select > WLAN Information
LABEL
SSID
Security Mode
Chapter 6 Wireless LAN
DESCRIPTION
Use the radio button to select the wireless device to which you want to connect.
This displays the Service Set IDentity of the wireless device. The SSID is a unique name that
identifies a wireless network. All devices in a wireless network must use the same SSID.
This displays the MAC address of the wireless device.
This displays the channel number used by this wireless device.
This displays which IEEE 802.11b/g/n wireless networking standards the wireless device
supports.
This displays the type of security configured on the wireless device. OPEN means no security is
configured and you can connect to it without a password.
This displays the strength of the wireless signal. The signal strength mainly depends on the
antenna output power and the distance between your WAP3205 v3 and this device.
Click this button to search for available wireless devices within transmission range and update
this table.
Click this button to associate to the selected wireless device.
DESCRIPTION
This displays the Service Set IDentity of the AP to which the WAP3205 v3 is connecting.
This displays the type of security configured on the AP to which the WAP3205 v3 is connecting.
WAP3205 v3 User's Guide
66