ZyXEL Communications wap3205 V3 User Manual page 82

Table 36 Maintenance > Operation Mode > General (continued)
LABEL DESCRIPTION
Apply Click Apply to save your settings.
Reset Click Reset to return to the previous screen settings.
If you select a mode (Access Point, Universal Repeater or Client Bridge) the following pop-up message
window appears.
Figure 66 Maintenance > Operation Mode > General
• All Ethernet ports have the same IP address.
• All ports on the rear panel of the device are LAN ports. There is no WAN port.
• The DHCP server on your device is disabled. In this mode there must be a device with a DHCP server
on your network such as a router which can allocate IP addresses or else you need to manually assign
IP addresses to devices on your network.
• The LAN IP address of the WAP3205 v3 is set to 192.168.1.2.
Chapter 12 Operation Mode
WAP3205 v3 User's Guide
82