ZyXEL Communications wap3205 V3 User Manual page 76

The following table describes the labels in this screen.
Table 34 Maintenance > Tools > Firmware
LABEL DESCRIPTION
Choose File Click Choose File button to find the.bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Automatically Click the Automatically reset default after firmware upgraded check box to have the WAP3205
reset default v3 automatically reset itself after the new firmware is uploaded.
after firmware
upgraded
Upload Click Upload to begin the upload process. This process may take up to two minutes.
Check for Click Check for Latest Firmware Now button to have the WAP3205 v3 search for the latest
Latest Firmware firmware available online at Zyxel's website.
Now
Note: Do not turn off the WAP3205 v3 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait for several minutes before logging into the
WAP3205 v3 again.
Figure 55 Upload Warning
The WAP3205 v3 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 56 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to the
Firmware screen.
Chapter 10 Tools
WAP3205 v3 User's Guide
76