ZyXEL Communications wap3205 V3 User Manual page 112

Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address
8
dynamically.
Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if
you have a static IP address that was assigned to you by your network administrator or ISP. You may also
have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided.Click
Advanced.
Click OK to close the Internet Protocol (TCP/IP) Properties window.
9
10 Click OK to close the Local Area Connection Properties window.
Verifying Settings
Click Start > All Programs > Accessories > Command Prompt.
1
In the Command Prompt window, type "ipconfig" and then press [ENTER].
2
You can also go to Start > Control Panel > Network Connections, right-click a network connection, click
Status and then click the Support tab to view your IP address and connection information.
Windows 7
This section shows screens from Windows 7 Enterprise.
Appendix C Setting Up Your Computer's IP Address
WAP3205 v3 User's Guide
112