Troubleshoot With The Leds; Power Led Is Off; Power Led Remains Blinking Green - NETGEAR WAC104 User Manual

Troubleshoot With the LEDs

When you turn on the power, the LEDs light as described here:
1.
The Power LED
remains that way, indicating that the startup procedure is complete and the access point is ready.
2.
When the startup procedure is complete, verify the following:
•
The WiFi LED
•
The WPS LED
•
If a LAN device is connected to a LAN port, the associated LAN LED
green.
You can use the LEDs for troubleshooting. For more information, see the following sections:
•

Power LED Is Off

•

Power LED Remains Blinking Green

•
WiFi LED Is Off
Power LED Is Off
If the Power LED
• Make sure that the Power On/Off button on the back is in the on position, that is, it is pushed in.
•
Make sure that the power cord is correctly connected to the access point and that the power supply
adapter is correctly connected to a functioning power outlet.
• Make sure that you are using the 12V, 1.5A power adapter that NETGEAR supplied for this product.
If the error persists, a hardware problem might exist. For recovery instructions or help with a hardware
problem, contact technical support at netgear.com/support.
Power LED Remains Blinking Green
When you turn on the power to the access point, the Power LED
blinks green, and finally turns solid green and remains that way, indicating that the startup procedure is
complete and the access point is ready. During operation, the only time that the Power LED might be blinking
green is when firmware is being upgraded.
If the Power LED remains blinking green and does not turn solid green, a failure occurred or the access
point is malfunctioning.
802.11ac Wireless Access
lights solid green temporarily, then blinks green, and finally turns solid green and
lights solid green or blinks green (unless the WiFi radios are turned off).
lights solid green or blinks green (unless the WiFi radios are turned off).
on page 70
on page 70
on page 71
and other LEDs are off when the access point is turned on, do the following:
Troubleshooting
lights solid green temporarily, then
70
lights solid green or blinks