NETGEAR WAC104 User Manual page 59

To add WiFi devices to the access control list and enable access control:
1. Enter the IP address that is assigned to the access point.
If you did not enable the DHCP client on the access point or did not assign a static IP address, enter
the default access point IP address 192.168.0.100.
A login window opens.
2.
Enter the access point user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The Home page displays.
3. Select Advanced Setup > Advanced Wireless Settings.
The Advanced Wireless Settings page displays.
4. Scroll down to the bottom of the page and click the Set Up Access List button.
If you did not yet add any WiFi devices to the access list, the table does not show any.
5. Click the Add button.
The Available Wireless Client List shows the detected WiFi devices with their device name and MAC
addresses.
6. To add a device to the allowed list, either select the radio button of a WiFi device on the Available
Wireless Client List or, if the WiFi device does not show on the Available Wireless Client List, enter the
device name in the Device Name field and the MAC address in the MAC Address field.
802.11ac Wireless Access
Manage the Advanced WiFi Features
59